The Lube Saver system is designed to dispense fluid based lubricants using a simple dedicated logic controller with repeat cycle intervals programmed to apply just the right amount of lubricant at each lube point. Menu driven programming allows the lube technician to quickly and easily program how long the lube pump will run for each “event” and how long the corresponding lube zone valve will remain open to allow lube to flow.

How It Works
At the the beginning of each shift the operator determines which zones are to be lubricated and selects the corresponding zone switches on the front of the system as well as turning on the cycle start switch. At the end of the shift, the operator turns the cycle start switch to the off position. Lube cycles can also be triggered automatically from a PLC, conveyor motor switch, etc.

Features and Benefits

• Dispense synthetic lubes to reduce water usage and discharge
• Dispense water based lubes with automatic zone control and optimization
• Clean and simple installation
• Less complicated than water driven pumps
• Simple digital controller with menu driven programming and password protection
• Reliable electric diaphragm lube pump (.4 , 1.5 , or 3.2 GPM)(1.5 , 5.7, or 12.1 LPM)
• Rugged 16 gauge #304 stainless steel control cabinet
• Supplies up to six lube zones with external on/off activation
• Lube cycle start with a toggle of a switch, voltage signal or dry contact inputs
• Easy to install, no need for highly skilled installation labor
• Track lube usage with EDGE data logger

Get Brochure (Please wait while file opens)
Get Instruction Manual
Download Acrobat Reader 
.

Lube Saver automatic lubrication system

Electric Diaphragm Pump with internal bypass (Viton)

Electric Diaphragm Pump with internal bypass (Viton)

Electric Diaphragm Pump with internal bypass (Viton)

Electric Diaphragm Pump with internal bypass (Viton)

Electric Diaphragm Pump with internal bypass (Viton)